Audient ORIA Mini – Sound correction system hardware powered by Sonarworks SoundID Reference
The Audient ORIA Mini is a hardware part correction system designed to instantly transform your listening environment. Installed between your audio interface and monitoring speakers, it acts as a dedicated processor that analyse, correct and optimize acoustic imperfections your studio, whether it is a domestic room or a professional space. Thanks to its close cooperation with Sonarworks, Audient offer here the ultimate hardware solution for SoundID Reference — allowing rapid, accurate and permanent calibration, without requesting the CPU of your computer.
With SoundID Reference, the reference software used in more than 250,000 studios worldwide, ORIA Mini allows you to measure your piece and create a custom acoustic correction profile. This profile is then loaded directly into the integrated processor of the Mini ORIA, guaranteeing a linear, consistent and totally reliable listening on all your sessions. No more plug-ins on the master bus: your calibration remains active continuously, without latency, crashing and software constraint.
Thanks to its converters 32 bits high resolution and an impressive dynamic range of 127 dB, ORIA Mini delivers an absolute transparency sound, revealing each shade of your mix accurately. This level of clarity changes your way of working: you make decisions faster, safer, and your mixes translate better into all systems – from smartphone to car, to streaming platforms.
Compact but fearlessly powerful, ORIA Mini integrates a DSP on board allowing automatic calibration with Sonarworks, or manual adjustment via tools such as Smaart or RoomEQ Wizard. Each output has a Parametric EQ, Trim setting, delay and Bass Management to perfectly adapt the response of your speakers and bass box to your space.
The configuration is an exemplary simplicity: measure your room, calibrate with SoundID, transfer up to four custom profiles in the Mini ORIA, and enjoy a tuned listening in less than 20 minutes. You can then alternate between different profiles (mix studio, car, phone, Hi-Fi, etc.) to instantly test the translation of your mixes.
Available in several offers according to your needs: with or without licence SoundID Reference and with or without measuring microphone, ORIA Mini integrates into any setup, without complex installation or incompatibilities. It's a professional, portable and scalable solution thought for the demanding creators who finally want trusting their ears.
Main features:
- Parts correction hardware system developed in partnership with Sonarworks
- SoundID Reference Compatible (software and micro included according to the pack)
- Integrated DSP Processor for operation without CPU load or latency
- 32-bit AD/DA Converters – dynamic range of 127 dB
- 4 customizable profile locations for different target curves or listening simulations
- Works with all audio interfaces and monitoring speakers
- Manual settings available : EQ, delay, trim, bass management per output
- Installation time : complete calibration in less than 20 minutes
- Compact and portable format, ideal for home studies and mobile environments
- Offers available : with / without SoundID Reference, with / without measuring microphone
Key Points:
- Professional monitoring, stereo calibration 2.1 (with or without sub)
- Internal DSP dedicated to calibration and acoustic management
- High-end conversion quality with 126 dB of dynamics
- Total compatibility Dolby Atmos and multichannel workflows
- Several offers available by budget and I/O requirements
